ONIE Recovery on x86-enabled Netberg Aurora switches

This page describes how to install the ONIE boot loader on Netberg Aurora switches.

1. Download the recovery image suitable for your switch or build one from GitHub.

Intel Tofino-based switches:

Aurora 610 recovery image

Aurora 710 recovery image

Aurora 750 recovery image

Aurora 810 recovery image

Innovium-based switches:

Aurora 615 recovery image

Aurora 715 recovery image

Broadcom-based switches:

Aurora 221 recovery image

Aurora 621 recovery image

Aurora 721 recovery image

Aurora 820 recovery image

Aurora 830 recovery image

Aurora 420/620/630/720 recovery image for OpenSwitch and ICOS

Aurora 420/620/630/720 recovery image for Open Networking Linux

2. Copy ONIE recovery to a USB thumb device.

Use “dd” command to copy the .iso image to a USB stick:

dd if=onie-recovery-x86_64-netberg_rangeley_p1330-r0.iso of=/dev/sdb bs=10M

3. Connect a USB thumb device to the front panel USB port.

4. Connect to the switch via serial console using standard settings:
Circuit Wizard 3.5 Free Download

WARNING: Do not use a USB-mini USB cable, it will damage the console port on the switch.

Use the enclosed serial cable.

5. Power on the switch and press <ESC> until entering BIOS.

Go to the “Save & Exit” tab and boot to the USB drive using “Boot override” section.

aurora_bios

6. Embed ONIE to the switch.

embed_onie

7. ONIE is ready after reboot. (Please remove the USB stick)

onie_boot

Circuit Wizard 3.5 Free Download !full!

Q: Is Circuit Wizard 3.5 suitable for beginners? A: Yes, Circuit Wizard 3.5 is suitable for beginners, and the software comes with a comprehensive tutorial to help you get started.

Q: Can I simulate analog and digital circuits with Circuit Wizard 3.5? A: Yes, Circuit Wizard 3.5 allows you to simulate both analog and digital circuits. Circuit Wizard 3.5 Free Download

Q: Is Circuit Wizard 3.5 compatible with Windows 10? A: Yes, Circuit Wizard 3.5 is compatible with Windows 10. Q: Is Circuit Wizard 3

Circuit Wizard 3.5 is a powerful and easy-to-use electronic circuit design software that is perfect for students, hobbyists, and professionals. With its intuitive interface, powerful simulation capabilities, and vast component library, it's an ideal choice for anyone interested in electronics. By following the steps outlined in this article, you can get a free download of Circuit Wizard 3.5 and start designing and simulating electronic circuits today. A: Yes, Circuit Wizard 3

Circuit Wizard 3.5 is a popular electronic circuit design software developed by New Wave Interactive. It is widely used by students, hobbyists, and professionals to design, simulate, and test electronic circuits. The software offers a user-friendly interface, powerful simulation capabilities, and a vast library of components, making it an ideal choice for anyone interested in electronics.

Q: Can I use Circuit Wizard 3.5 for commercial projects? A: Yes, you can use Circuit Wizard 3.5 for commercial projects, but you'll need to purchase a license.